(08) 7008 7092Request a quotearrow_forward
Adelaide test and tag

Is every lead and appliance tested and tagged?

Appliances, extension leads, power boards and safety switches tested and tagged to AS/NZS 3760 by our trained Adelaide technicians. Failed leads are swapped on the spot, and you get a register of every item with a reminder before the next round is due.

Get a quotearrow_forwardcallCall (08) 7008 7092
AS/NZS 3760Tested to standard
On the spotFailed leads swapped
FreeSite check
electrical_servicesFree site check

Get your test and tag quote.

Tell us roughly how many items you have and where, and we'll come back the same business day.

Free site assessment, no obligation. We reply the same business day.

Trusted across Australia

Proud to support

JOSCAR Registered
JOSCAR RegisteredAustralian government & defence supplier registry
LJ Hooker CommercialMastracorpPro RealtyRay WhiteALMSelect
SafePulse technician showing an office manager the test and tag register on his tablet
Who we help

Responsible for a workplace? We’ll test and tag everything that plugs in.

Keeping electrical equipment safe is the business’s duty. The testing, the tagging and the records can be ours.

01

Offices, shops and clinics

Kettles, chargers, computers, power boards and leads, tested in one visit and planned around your day.

02

Warehouses and workshops

Power tools, leads and RCDs on the shorter cycle that tougher environments need.

03

Property and facility managers

Common area equipment across every site, with one register you can hand to any auditor.

What we do

Every item tested. Every tag dated.

Appliances, leads, power boards and safety switches, tested to the Australian Standard with the proof on file.

SafePulse technician wrapping a test tag around an extension lead
electrical_services

Appliances, leads and power boards

Everything that plugs in is inspected and tested to AS/NZS 3760, then tagged with the test date and when it's next due.

Get a test and tag quote arrow_forward
SafePulse technician testing a safety switch with an RCD tester at a power point
bolt

Safety switches (RCDs)

Your safety switches trip-time tested through the power points and portable RCDs checked, with every result on the register.

Add RCD testing arrow_forward
SafePulse technician handing over a new extension lead and holding a damaged one with a red tag
swap_horiz

Failed leads swapped on the spot

A lead or power board that fails is replaced with a new one while we're there. Faulty appliances are tagged out of service and listed for repair or replacement.

Book a test and tag arrow_forward
SA test and tag rules

What does SA law ask of your workplace?

SA’s WHS Regulations set out what has to be tested and what you keep, and AS/NZS 3760 sets how often. These are the published rules, not legal advice.

Reg 165Safety switches

RCDs tested in every workplace

Whoever manages or controls a workplace must have its safety switches tested regularly by a competent person, and keep the results. Fines go up to $18,000 for a company.

Covers
  • Offices
  • Shops
  • Clinics
  • Warehouses
Reg 150Hostile environments

Tested where gear takes a beating

Plug-in equipment that works in conditions likely to damage it must be regularly inspected and tested by a competent person, and it can't be used until it is. Fines go up to $18,000 for a company.

Covers
  • Workshops and factories
  • Commercial kitchens
  • Wet or dusty areas
  • Outdoor work
Every testRecords

A record of every test, kept until the next one

Each test needs the tester's name, the date, the result and when it's next due. A tag on the item counts. Keep it until the next test or until the item's gone. Fines go up to $6,000 for a company.

Covers
  • Test tags
  • Registers
  • RCD results

Not sure what needs testing, or how often? We’ll check your site for free.

Book my free site checkarrow_forward
Our working process

You tell us what you’ve got. We handle the rest.

Twenty items or two thousand, the steps are the same and the records are kept for you.

Step 01
chat

Tell us what you've got

A rough count of appliances and leads, the type of workplace and when they were last tested.

Step 02
fact_check

Free site check

We walk the site, count what needs testing and set the right interval for each area.

Step 03
request_quote

Clear quote

A clear price before we start, based on what you've actually got.

Step 04
electrical_services

Tested & tagged

Every item inspected, tested and tagged. Failed leads swapped on the spot, faulty appliances tagged out.

Step 05
event_repeat

Records & reminders

A register of every item and its result, and a reminder before the next round is due.

Service options

Every round on a plan, or a single visit?

Put your workplace on a plan that comes back when testing is due, or book one visit for a fit-out, a move or a first round.

Best for workplacesSafePulse technician arriving at a workplace with a test and tag kit
Test and Tag Plan

For workplaces that want every round handled.

Every item on a schedule set for each area of your workplace. We come back before the next round is due, test new gear as it arrives and keep the register current.

What’s included
schedule
Set to AS/NZS 3760
electrical_services
Appliances, leads, boards
bolt
RCDs tested
swap_horiz
Failed leads swapped
list_alt
Register kept for you
event_repeat
Reminder before it's due
Get a test and tag quotearrow_forward
Power board with a test tag on every cord
One-Off Test and Tag

For a fit-out, a move or a first round.

One visit: every item tested and tagged, failed leads swapped and a register for the site.

Every item testedTags datedFailed leads swappedRegister for the site
Book a test and tagarrow_forward
Common questions

Test and tag, answered.

The questions Adelaide businesses ask us most.

Still have a question?

Speak to our team. We reply the same business day.

call(08) 7008 7092Get a quote arrow_forward
Is test and tag a legal requirement in SA?add
For a lot of workplaces, yes. SA's WHS Regulations require plug-in equipment in a hostile environment, like a workshop, commercial kitchen or wet or dusty area, to be regularly inspected and tested by a competent person. Safety switches have to be tested regularly in any workplace. Everywhere else, the duty to manage electrical risks still applies, and AS/NZS 3760 is how most businesses meet it.
How often does equipment need testing?add
AS/NZS 3760 sets intervals by environment: every 6 months in factories and workshops, every 12 months where cords get flexed or knocked about, up to 5 years for equipment that stays put, and every 2 years in the residential parts of hotels and hostels. We set the interval for each area of your site.
Does office equipment need testing every year?add
Not by law. SA's testing rule for plug-in equipment is aimed at hostile environments, and AS/NZS 3760 allows up to 5 years for office equipment whose cords aren't moved or knocked about. Leads and power boards that move around are usually on 12 months. We'll tell you what applies to each area after the free site check.
Who can test and tag?add
A competent person, which SafeWork SA describes as someone with the right training, such as a nationally recognised test and tag course. Our technicians hold the nationally recognised test and tag unit.
What happens when something fails?add
It comes out of use straight away. Leads and power boards that fail are swapped for new ones on the spot, so nobody's left without power. A faulty appliance is tagged out of service and listed on your register to be repaired or replaced.
Do you test safety switches (RCDs)?add
Yes. We trip-time test your safety switches through the power points and check portable RCDs, and the results go on your register with everything else.
Does new equipment need testing?add
New equipment that hasn't been used only needs a check for damage before it goes into use. We can tag it as new to service so it's on the register from day one.
Will it disrupt the workplace?add
Each item is only unplugged for a minute or two. We work through the site area by area and plan the visit around your day.
What do the records show?add
Every item, where it is, who tested it, the test date, the result and when it's next due. That's what the regulations ask you to keep, and it's ready when an auditor or insurer asks.
Can you do it on the same visit as our fire equipment?add
Yes. Test and tag can go on the same visits as your fire equipment, AEDs and first aid kits, so it's one booking instead of several.
What does it cost?add
It depends on how many items and safety switches you have and where they are. Book a free site check and we'll come back with a clear quote.
Coverage

Test and tag across Adelaide and SA.

One office or a dozen sites, our Adelaide-based team covers metro Adelaide and the surrounding regions.

CBDAdelaide cityarrow_forwardNorthNorthern suburbsarrow_forwardSouthSouthern suburbsarrow_forwardEastEastern suburbsarrow_forwardWestWestern suburbsarrow_forwardHillsAdelaide Hillsarrow_forwardFleurieuFleurieu Peninsulaarrow_forwardBarossaGawler & Barossaarrow_forward
Test and tag Adelaide

Send your details, get a quote.

Tell us roughly how many items you have and where. We'll come back the same business day with a time for your free site check.

callOr call (08) 7008 7092
electrical_servicesFree site check

Get your test and tag quote.

We'll come back the same business day.

Free site assessment, no obligation. We reply the same business day.